Embedded Files
The Cadex battery analysers perform a full analysis and test on lithium, nickel and lead batteries with custom battery adapters or a selection of general, universal adapters.
Downloads
Automated vs Custom Programs
Built-in programs such as "Auto", "Charge" and "Prime" assure safe usage even when servicing a known faulty battery.
The user can provide user-defined programs for charge, discharge, recondition, wait and repeat; but also set conditional if/else, stop/continue criteria to ensure the best possible program refinement.
Accessories & Optional Extras
Carry Case
87-725-0002
Calibration Kit
92-770-0212
BatteryShop
92-770-0000-00
4 Year Warranty
99-100-0000
Universal Battery Adapter Options
SnapLock™ Adapters
FlexArm™ Adapter
RigidArm™ Adapter
Smart Cable Adapter
Custom Battery Adapter Options
The Cadex SnapLock™ custom adapters are available to suit the majority of batteries and allow an easy interface. SnapLock™ adapters contain C-codes that configure the C7200 and/or C7400 analyser to the correct setting, and supports up to 10 C-codes to service different battery types from the same adapter.
Sony
Motorola
Philips
BatteryShop™ PC Software
Cadex BatteryShop™ provides a simple, yet powerful PC-interface to control and monitor Cadex C7x00 C-Series battery analysers. The database contains a battery library with over 3,000 batteries. The battery library can be edited to add other batteries. BatteryShop™ operates up to 32 Cadex C7200 or C7200 analysers for service of up to 128 batteries.
Voltage, current and temperature information is shown in real time graphics.
User Installed
Easy Setup
Label Printer
Barcoded Labels
Barcode Scanner
For Speed
Up to 128 Batteries
Concurently
Automated Battery Analyser Programs
Auto
Exercises the batteries and applies Recondition if the user-set target capacity cannot be reached
Charge
Applies fast charge with charge termination.
Prime
Prepares batteries by repeated cycling until the maximum capacity is reached.
Advanced Battery Analyser Programs
Self-Discharge
Determines rate at which a battery loses charge. Reflects intrinsic safety.
Lifecycle
Cycles battery until the capacity fades to the set Target Selector threshold.
Discharge Only
Prepares battery for shipping and storage. Also checks charger function.
Extended Prime
Assist in formatting of battery.
OhmTest™
Measure battery resistance with DC pulses; based on IEC61436 standard.
Runtime
Provides three discharge levels; programmable in hours and minutes.
Boost
Activates batteries that have been discharged too low.
The user can provide user-defined programs for charge, discharge, recondition, wait and repeat; but also set conditional if/else, stop/continue criteria to ensure the best possible program refinement.
Google Sites
Report abuse